Low Harmonic Distortion
Active PFC membantu menjaga kualitas daya dengan THD(I) rendah pada rentang beban luas.
ebm-papst EC Fan Wind Wall dan FanGrid Data Center Cooling Indonesia
ebm-papst · EC Fan & FanGrid Solution
EC Fan Wind Wall for Data Center Cooling
High-efficiency GreenTech EC fans for CRAH, CRAC, AHU, chiller, condenser, dry cooler, and modular FanGrid applications.
ebm-papst EC Fan Wind Wall adalah solusi fan modular untuk sistem pendinginan data center dan HVAC mission-critical. Dengan GreenTech EC Technology, Active PFC, komunikasi MODBUS RTU, dan pilihan RadiPac, RadiCal, serta AxiBlade, sistem ini membantu meningkatkan efisiensi, menurunkan noise, dan mempermudah retrofit dari AC fan konvensional ke EC fan modern.
GreenTech EC
Modular FanGrid
THD(I) ≤5%
MODBUS RTU
-40°C to +60°C
≤5%THD(I)
+25%Efficiency Potential
0.998Power Factor
1 TahunGaransi Standar
Performance Highlights
Energy, Power Quality, and Control Advantages
Dirancang untuk cooling system yang membutuhkan efisiensi tinggi, controllability, dan integrasi BMS tanpa menambah kompleksitas panel eksternal.
Higher Efficiency Potential
GreenTech EC motor lebih efisien terutama saat partial load dibanding sistem AC fan konvensional.
High Power Factor
Power factor tinggi membantu menekan losses dan mendukung desain electrical system yang lebih stabil.
GreenTech EC Technology
Motor EC brushless dengan integrated electronics untuk speed control presisi dan efisiensi tinggi.
Modular FanGrid Design
Multiple EC fans dalam satu wall/grid untuk redundancy, low noise, dan airflow yang lebih merata.
Smart Control Interface
Mendukung 0–10VDC/PWM, RS485 MODBUS RTU, dan integrasi kontrol untuk BMS atau cooling controller.
Built-in Protection
Soft start, locked rotor protection, line undervoltage detection, phase failure detection, dan thermal protection.
Product Type Tables
Fan Series Selection by Application
Data produk disajikan sebagai tabel agar tim engineering lebih mudah membandingkan ukuran fan, voltage, speed, power range, dan aplikasi utama.
RadiPac Centrifugal Fans
Untuk FanGrid, CRAH, AHU, fan wall, dan retrofit air handling system dengan kebutuhan static pressure tinggi.
| Model Series | Size | Voltage | Max Speed | Max Power | Recommended Application |
|---|---|---|---|---|---|
| K3G 310 | 310 mm | 380–480VAC 3~ | 2,800 rpm | 3,050 W | Compact AHU |
| K3G 450 | 450 mm | 380–480VAC 3~ | 2,800 rpm | 6,800 W | FanGrid, CRAH |
| K3G 500 | 500 mm | 380–480VAC 3~ | 2,400 rpm | 7,000 W | FanGrid, CRAH |
| K3G 560 | 560 mm | 380–480VAC 3~ | 1,860 rpm | 6,500 W | FanGrid, AHU |
| K3G 630 | 630 mm | 380–480VAC 3~ | 1,950 rpm | 9,780 W | FanGrid, AHU |
| K3G 710 | 710 mm | 380–480VAC 3~ | 1,680 rpm | 11,450 W | Large AHU |
| K3G 800 | 800 mm | 380–480VAC 3~ | 1,370 rpm | 11,300 W | Large AHU |
| K3G 1000 | 1000 mm | 380–480VAC 3~ | 750 rpm | 6,340 W | Cooling Tower |
Typical use: Fan wall/FanGrid, CRAH, AHU, and high-static-pressure retrofit applications.
AxiBlade Axial Fans
Untuk chiller, condenser, V-shape condenser, dry cooler, cooling tower, dan outdoor heat rejection equipment.
| Model Series | Size | Voltage | Max Speed | Max Power | Recommended Application |
|---|---|---|---|---|---|
| W3G 500 | 500 mm | 380–480VAC 3~ | 2,450 rpm | 4,000 W | Compact Chiller |
| W3G 560 | 560 mm | 380–480VAC 3~ | 1,990 rpm | 4,000 W | Condenser |
| W3G 630 | 630 mm | 380–480VAC 3~ | 1,800 rpm | 3,600 W | V-shape Condenser |
| W3G 710 | 710 mm | 380–480VAC 3~ | 1,680 rpm | 3,800 W | Chiller Unit |
| W3G 800 | 800 mm | 380–480VAC 3~ | 1,470 rpm | 3,900 W | Dry Cooler |
| W3G 910 | 910 mm | 380–480VAC 3~ | 1,190 rpm | 4,400 W | Cooling Tower |
Typical use: Outdoor heat rejection, condenser banks, chiller fans, dry coolers, and cooling tower applications.
RadiCal Centrifugal Fans
Untuk precision air conditioning, CRAC unit, PAC system, dan raised-floor air circulation.
| Model Series | Size | Voltage | Max Speed | Max Power | Recommended Application |
|---|---|---|---|---|---|
| R3G 450 | 450 mm | 380–480VAC 3~ | 2,500 rpm | 2,850 W | CRAC Unit |
| R3G 500 | 500 mm | 380–480VAC 3~ | 2,240 rpm | 4,250 W | CRAC Unit |
| R3G 560 | 560 mm | 380–480VAC 3~ | 2,080 rpm | 3,950 W | Precision AC |
| R3G 630 | 630 mm | 380–480VAC 3~ | 1,670 rpm | 4,500 W | Precision AC |
Typical use: CRAC/PAC unit, continuous 24/7 room cooling, and raised-floor circulation systems.
FanGrid Configuration
FanGrid Wind Wall System Overview
FanGrid cube membantu membangun wall of fans yang modular, serviceable, dan scalable untuk upgrade airflow pada AHU/CRAH maupun retrofit data center cooling.
FanGrid Cube Specifications
Available Sizes450 mm, 500 mm, 560 mm
Control Input0–10VDC / PWM
Output Signal10VDC, max 10mA
CommunicationRS485 MODBUS RTU
Protection RatingIP55
Temperature Range-25°C to +40°C
CertificationsUL/CSA, CE, VDE
Built-in Protections
- Over-temperature protection for motor and electronics.
- Soft start to reduce inrush current during fan start-up.
- Motor current limit protection and locked rotor protection.
- Line undervoltage detection and phase failure detection.
- Integrated PID controller for fan speed and airflow management.
- Resonance detection support for safer continuous operation.
Applications
Cooling Applications for Data Center and HVAC Systems
ebm-papst EC fans dapat digunakan untuk upgrade airflow, energy retrofit, dan new build cooling system pada berbagai equipment.
CRAH & AHU Fan Wall
RadiPac FanGrid untuk computer room air handler, AHU retrofit, and high airflow fan wall configuration.
CRAC & Precision AC
RadiCal fan for CRAC/PAC unit upgrade, raised-floor circulation, and 24/7 precision cooling operation.
Chiller, Condenser & Dry Cooler
AxiBlade axial fan for condenser bank, V-shape condenser, dry cooler, and outdoor heat rejection equipment.
Cooling Retrofit & Energy Upgrade
Replace or upgrade conventional AC fan system with EC fan technology to improve efficiency and controllability.
Why NPS
Why Choose NPS?
NPS membantu pemilihan fan, sizing, integrasi kontrol, instalasi, commissioning, dan lifecycle support untuk sistem cooling data center dan HVAC.
Authorized Partner
Produk original ebm-papst dengan dukungan technical selection, quotation, dan after-sales dari NPS.
Engineering-Based Selection
Rekomendasi fan berdasarkan airflow, static pressure, cabinet layout, control interface, noise target, dan environment.
Installation & Commissioning
Dukungan retrofit, mounting, wiring, communication setting, fan balancing, dan commissioning on-site.
Maintenance Support
Preventive maintenance, troubleshooting, spare-part coordination, and replacement planning for critical cooling equipment.
Need Help Selecting the Right EC Fan System?
Tim engineering NPS dapat membantu mengevaluasi airflow requirement, pressure drop, redundancy, control interface, dan retrofit strategy sebelum menentukan ebm-papst EC Fan atau FanGrid yang tepat.